Subpart A provides the standards in 29 CFR 1910 - General Industry, that apply to marine terminals.  

To learn if subpart A applies to you, go to Does "Subpart A - General Provisions" Apply to You?

Special Requirements

Tab/Accordion Items

Scope: This standard provides the scope and applicability of the marine terminal standards as well as general industry (1910) standards that apply to marine terminals.

Special Requirements: References other standards

Part 1910 of this chapter does not apply to marine terminals except for the following provisions:

1917.1(b) - Section 1915.1026 applies to any occupational exposures to hexavalent chromium in workplaces covered by this part.

Scope: This standard provide the compliance duties owed to employees. 

Special Requirements: Personal protective equipment, training, training program, compliance duty, affected employee

1917.5(a) - Personal protective equipment. Standards in this part requiring the employer to provide personal protective equipment (PPE), including respirators and other types of PPE, because of hazards to employees impose a separate compliance duty with respect to each employee covered by the requirement. The employer must provide PPE to each employee required to use the PPE, and each failure to provide PPE to an employee may be considered a separate violation.

1917.5(b) - Training. Standards in this part requiring training on hazards and related matters, such as standards requiring that employees receive training or that the employer train employees, provide training to employees, or institute or implement a training program, impose a separate compliance duty with respect to each employee covered by the requirement. The employer must train each affected employee in the manner required by the standard, and each failure to train an employee may be considered a separate violation.

On This Page Jump Links
Off