Scope: This standard provides the requirements for ship's boilers.

Special Requirements:  Lock(ed), tag(ged), (warning) sign, determined, references other standards

1915.162(a)(1) - The isolation and shutoff valves connecting the dead boiler with the live system or systems shall be secured, blanked, and then locked or tagged, in accordance with § 1915.89 - control of hazardous energy (lockout/tags-plus), indicating that employees are working on the boiler. This lock or tag shall not be removed nor the valves unblanked until it is determined that this may be done without creating a hazard to the employees working on the boiler, or until the work on the boiler is completed, in accordance with § 1915.89 - control of hazardous energy (lockout/tags-plus). When valves are welded instead of bolted, at least two isolation and shutoff valves connecting the dead boiler with the live system or systems shall be secured, and then locked or tagged, in accordance with § 1915.89 - control of hazardous energy (lockout/tags-plus).

1915.162(a)(3) - A warning sign calling attention to the fact that employees are working in the boilers shall be hung in a conspicuous location in the engine room. This sign shall not be removed until it is determined that the work is completed and all employees are out of the boilers.

Scope: This standard provides the requirements for the ship's piping system.

Special Requirements: Lock(ed), tag(ged), determined, visual observation, references other standards

1915.163(a)(1) - The isolation and shutoff valves connecting the dead system with the live system or systems shall be secured, blanked, and then locked or tagged, in accordance with § 1915.89 - control of hazardous energy (lockout/tags-plus), indicating that employees are working on the systems. The lock or tag shall not be removed or the valves unblanked until it is determined that this may be done without creating a hazard to the employees working on the system, or until the work on the system is completed, in accordance with § 1915.89 - control of hazardous energy (lockout/tags-plus). When valves are welded instead of bolted, at least two isolation and shutoff valves connecting the dead system with the live system or systems shall be secured, and then locked or tagged, in accordance with § 1915.89 - control of hazardous energy (lockout/tags-plus).

1915.163(a)(2) - Drain connections to the atmosphere on all of the dead interconnecting systems shall be opened for visual observation of drainage.

Scope: This standard provides the requirements for the ships' propulsion machinery.

Special Requirements: Steps, sign posted, warning sign, locked, tagged, check, precautions, testing, references other standards

1915.164(a) - Before work is performed on the main engine, reduction gear, or connecting accessories, the employer shall ensure that the following steps are taken:

• 1915.164(a)(1) - The jacking gear shall be engaged to prevent the main engine from turning over. A sign shall be posted at the throttle indicating that the jacking gear is engaged. This sign shall not be removed until the jacking gear can be safely disengaged.

• 1915.164(a)(2) - If the jacking gear is steam driven, the employer shall ensure that the stop valves to the jacking gear are secured, and then locked or tagged, in accordance with § 1915.89 - control of hazardous energy (lockout/tags-plus).

• 1915.164(a)(3) - If the jacking gear is electrically driven, the circuit controlling the jacking gear shall be de-energized by tripping the circuit breaker, opening the switch, or removing the fuse, whichever is appropriate, and then locked or tagged in accordance with § 1915.89 - control of hazardous energy (lockout/tags-plus).

1915.164(b) - Before the jacking engine is operated, the following precautions shall be taken:

• 1915.164(b)(1) - A check shall be made to ensure that all employees, equipment, and tools are clear of the engine, reduction gear, and its connecting accessories.

• 1915.164(b)(2) - A check shall be made to ensure that all employees, equipment and tools are free of the propeller.

1915.164(c) - Before work is started on or in the immediate vicinity of the propeller, a warning sign calling attention to the fact that employees are working in that area shall be hung in a conspicuous location in the engine room. This sign shall not be removed until it is determined that the work is completed and all employees are free of the propeller.

1915.164(d) - Before the main engine is turned over (e.g., when warming up before departure or testing after an overhaul) a check shall be made to ensure that all employees, equipment, and tools are free of the propeller.

Scope: This standard provides the requirements for the ship's deck machinery.

Special Requirements: Steps

1915.165(a) - Before work is performed on the anchor windlass or any of its attached accessories, the employer shall ensure that the following steps are taken: [Reference paragraph (a)(1) - (3)].