CFR 176A - Process Safety Management of Highly Hazardous Chemicals and Slings

On April 15, 2019, OSHA revised Title 29 of the Code of Federal Regulations, Part 1910. OSHA is correcting the Chemical Abstract Service (CAS) number listed for methyl vinyl ketone in Appendix A of 29 CFR 1910.119, Process Safety Management of Highly Hazardous Chemicals (Federal Register). 

In addition, OSHA is restoring two figures to 29 CFR 1910.184, Slings, that are referenced in section (b) definitions of the standard and were inadvertently removed by amendments published on June 8, 2011. The N.C. Commissioner of Labor adopted this final rule verbatim with an effective date of June 3, 2019. 

Also reference CFR 114A - Process Safety Management of Highly Hazardous Chemicals; Final Rule; Administrative Stay, CFR 114 - Process Safety Management of Highly Hazardous Chemicals; Explosives and Blasting Agents; Final Rule, CPL 02-02-045, Process Safety Management of Highly Hazardous Chemicals - Compliance Guidelines and Enforcement Procedures,  CPL 02-01-014 Alloy Steel Chain Slings Proof-Testing and CPL 03-00-21, Process Safety Management (PSM) Covered Facilities. Additional information and resources can be found on the safety and health topic page for Process Safety Management and Materials Handling and Storage.