CFR 110B - Electrical Standards


CFR 110B - Electrical Standards

PDF • 68.76 KB - December 16, 2022

On October 29, 2008, federal OSHA issued this final rule (Federal Register) to clarify the scope of section 1910.304(b)(3)(ii) and to address questions raised by stakeholders. In addition, this final rule also corrects two typographical errors located elsewhere in the rule. The N.C. Commissioner of Labor adopted the final rule clarifications and correcting amendments verbatim with an effective date of April 23, 2009. 

Also reference CFR 110 - Electrical Safety-Related Work Practices; Final Rule, CFR 110A - Electrical Standards, SN 09 - Determining Hazardous (Classified) Locations in Unventilated Pits or Depressions Below Grade in Commercial Garages, SN 10 - Requirements for Portable Lamps in Vehicle Service Garages, SN 19 - Class I and Class II, Division 2 Hazardous Locations for Spray Finishing and SN 49 - Ground-Fault Protection in Construction Operations. Additional information and resources can be found on the safety and health topic page for Electrical Safety.

First Published
Last Updated