CFR 096B - Mechanical Power Presses

cfr96B.pdf

CFR 096B - Mechanical Power Presses

PDF • 77.47 KB - December 29, 2022

On June 8, 2004, federal OSHA issued this final rule (Federal Register) to correct errors in four standards. This amendment is a correction of typographical errors in the Mechanical Power Presses Standard (29 CFR 1910.217). The introductory text of paragraph (c)(5) is amended to by adding a comma after the word “device” and removing the word “of” before the word “type.” The N.C. Commissioner of Labor adopted the revised federal standards verbatim with an effective date of September 17, 2004. 

Also, reference CFR 096C - Mechanical Power Presses Record Requirements. Additional information and resources can be found on the safety and health topic page for Mechanical Power Press. To determine if this rule applies, go to "Do employees use mechanical power presses?"

Division/Office
First Published
Last Updated