CFR 132B - Electric Power Generation, Transmission and Distribution

cfr132B.pdf

CFR 132B - Electric Power Generation, Transmission and Distribution

PDF • 573.61 KB - December 19, 2022

On April 11, 2014, OSHA issued a revised standard for General Industry, Electric Power Generation, Transmission and Distribution, 29 CFR 1910.269 and 29 CFR 1926, Subpart V - Electric Power Generation, Transmission and Distribution. On September 24, 2014, OSHA issued technical amendments to correct errors in the preamble and the regulatory text of the final rule (Federal Register). The N.C. commissioner of labor adopted these amendments verbatim. The effective for 29 CFR 1910.269 was October 8, 2014. The effective date for 29 CFR 1926 Subpart V was November 20, 2014. 

Also reference SN 70 - Revised ASTM Standards for Foot Protection and CFR 132A - Electric Power Generation, Transmission and Distribution. Additional resources and information can be found on the safety and health topic pages for Electrical Safety and Personal Protective Equipment.

Division/Office
First Published
Last Updated