Documents

This OSH Standards Notice discusses an alternative measure that may be used that will be construed as meeting 29 CFR 1910.262(j) in lieu of the requirement for interlocks on the gear housing covers on all installations of drawing frames, slubbers, roving frames, cotton combers, rind spinning frames, and twisters.

This OSH Standards Notice clarifies the applicable standards to cite for point of operation guarding of laundry machinery and dry-cleaning machinery.

This OSH Standards Notice applies the guidance in NEC and OSH general industry standards to unventilated pits and depressions in commercial garages to determine whether they should be classified as Class I, Division 1 or Class I, Division 2 locations.

This OSH Standards Notice discusses the safety requirements for portable hand lamps that are used by employees servicing vehicles.

This OSH Standards Notice provides guidance regarding acceptable containers, in accordance with 29 CFR 1910.106, for the storage of flammable liquids.

Thsi OSH Standards Notice clarifies what constitutes Class I or Class II, Division 2 hazardous locations surrounding spray finishing operations.

This OSH Standards Notice provides multiple interpretations regarding 29 CFR 1926.451 (Scaffolds - General Requirements).

This OSH Standards Notice discusses the requirements for protecting employees against nip-point motions, gears, and pulleys on the sides of carding machines used in the textile industry.

This OSH Standards Notice states the requirement for an interlock device, braking mechanism or time delay to protect employees from possible injury in situations when the cylinder of a tumbler, shaker or washing machine continues to rotate after the power is shut off .

This OSH Standards Notice provides guidance for the selection of proper PPE for eye and face protection when working with chemicals.

Subscribe to Documents